• www.cvgtechnocrafts.com

Digital Flowmeters

CVG Technocrafts India Electromagnetic Flowmeter

Unitech Process Control UPCS MAG-110 are micro-controller based full bore type electromagnetic flow meters specially used for various industrial applications. These flow meters accurately measures the flow rate of conductive liquid & slurries in closed pipes. Due to simple & rigid design, the flow meter is an obstruction less & maintenance free instrument in place of conventional mechanical flow measuring device. The use of ‘ Pulsed DC’ technology offers highest ability & better measuring accuracy in the form of electrical signal 4 - 20mA DC linearly proportional to volumetric flow. The instrument is based on Faraday’s law of electro-magnetic induction. A magnetic field is generated by the instrument in the flow tube. fluid flowing through this magnetic field generates a voltage that is proportional to the flow velocity. Corresponding electrical output is provided with respect to measuring flow range.

Electromagnetic Flowmeter Manufacturers in India

Standard Features :

  • Suitable for conductive liquids
  • Maintenance free
  • Full bore type
  • Local Indication through LCD
  • Simple & cost effective construction
  • Empty pipe indication
  • Material option depending upon process data
  • Universal Power Supply 90 to 260V AC Optional 24V DC
  • Communication port (Optional)

Technical Specification

Media : Liquids (Conductive)
Conductivity : > 5 µs/cm
Viscosity : 200 cp max
Line Size : 15 NB to 1000 NB
Excitation : Pulsed DC
Type of Output : 1) 4 to 20 mA DC, Isolated
2) Pulse
Display : Graphics type
Engineering Unit : User Programmable (m3 /hr by default)
Calibration Range : As per requirement (Factory Calibrated)
Accuracy : +/- 0.5% of F. S. (for 20 to 100% flow)
Linearity : +/- 0.5% of F. S.
Repeatability : +/- 0.2% of F. S.
Temperature Coef cient : +/- 0.05% per °C
Process Temperature : 85° C max for Rubber Lining & 150°C for PTFE Lining
Process Pressure : 10 kg/cm² max (higher on request)
Material of construction : Lining - Rubber (5mm +/-1mm thick) / PTFE (3mm +/-1mm thick)
Flange - CS / MS / SS
Electrode - SS 316L / Hastalloy C / Platinum
Coil Housing - MS / SS 304
Power Supply : Option 1 : 24 V DC
Option 2 : 90 - 260 V AC, 50 Hz
Power Consumption : < 10 VA
Isolation : 1.4 KV between Input, Output & Power Supply
Response Time : < 1 Sec
Transmitter Enclosure : Die cast Aluminium IP 66, flow tube IP 68
Process Connections : ASA 150 flanged, as per table B 16.5
Mounting : In-Line Horizontal (Vertical on request)
Operating Conditions : Temperature 0 to 550C / Humidity 5 to 95% non condensing
Note : For process conditions other than above please consult factory.
OPTIONAL
Communication Port : 1) RS 485 supporting MODBUS/HART(OPTIONAL)
2) GSM Communication
Electronics : Remote Electronics

CVG Technocrafts India Related Products

Digital Metal Tube Rotameter

Digital Steam Jacket Flow Meter

Turbine Flowmeter

Digital Gas Flow Meter with Totaliser

Electromagnetic Flowmeter

HOW CAN WE HELP?

Contact us at the CVG office nearest to you or submit an inquiry online.

BROCHURE

Manufacturers of : Process Control Instruments, Flow, Pressure Level, Temp., Measuring instruments.

OFFICE ADDRESS:

2, Ashpaque Compound, Scout Camp Road, Ganesh Nagar, Behram Baug,Jogeshwari (west), Mumbai -400102, Maharashtra India.

CONTACT US:

T: 022 26741043 , M: +91 - 09323807296
E: sales@cvgtechnocraft.in

Copyright 2019 CVG Technocrafts India | All Rights Reserved